Specifications:

• FREQUENCY RESPONSE: 25Hz-20kHz
• SENSITIVITY: Closed loop system
• MAXIMUM BURST POWER OUTPUT: 500W
• MAXIMUM ACOUSTIC OUTPUT: 113dB maximum at listening position
• COVERAGE ANGLE: Near field design
• DISPERSION ANGLE: 90° x 40° MicroTractrix Horn
• NOMINAL IMPEDANCE: Satellites 6-8 ohms
• OVERLOAD PROTECTION: Limiter circuit
• ENCLOSURE TYPE: Satellites and center sealed; subwoofer 6th order bass reflex
• AMPLIFIER: BASH®, dual supply
• LOW PASS CROSSOVER: To satellites @ 120Hz INPUTS: Six analog discrete channels (three stereo mini-plugs)
• OUTPUTS: Five speaker level outputs (spring clips)
• TRANSDUCERS: 0.75" metalized polymer tweeter and 3" fiber-composite mid-bass in satellites and center channel; dual 8" fiber-composite subwoofers
• TWEETER: 0.75"
• HIGH FREQUENCY HORN: MicroTractrix Horn
• HIGH FREQUENCY CROSSOVER: 3000Hz
• WOOFER: 3"
• LOW FREQUENCY CROSSOVER: Urethane surround mid-bass driver
• INPUT CONNECTIONS: DIN cable to control tower SUBWOOFER: Dual 8" side-firing drivers
• WIRE GAUGE ACCOMMODATED: 18 gauge supplied; will accept 14 gauge
• WEIGHT: 43.5 lbs. (19.75kg)
• ENCLOSURE MATERIAL: MDF
• FINISHES: Gunmetal gray on satellites, matte black on subwoofer
• ACCESSORIES: Rubber Feet attached to satellites and center
• VOLTAGE: 120 Volt
• EXPORT VOLTAGE: (230 volt for international under development)
• MOUNTING: Wall Brackets (WB-1) available at Klipsch web store
• FEATURES: Center channel has rear post angle adjustment for optimum positioning on top of various computer monitors

Installation of the speaker system was straight forward and done without referencing the included manual. The bundled speaker wire has soldered tips to ensure perfect connections with the spring clips on each speaker. The front satellites were placed on each side of a 21" monitor, the center on top of the monitor (utilizing the rubber foot post for proper angle), and the rears approx. 5 feet behind the listener. 3 connections are required for 5.1 sound: front, rear, and center/sub analog connections. The 5.1's do not offer a digital input, which may be a drawback to some users. The final setup is the newly added feature (over the Promedia 4.1 system) called the "Control Pod" or "Control Tower". The Pod is a separate device that connects to the rear of the sub (as all connections do) that controls system volumes. Center channel, Rear, Sub, and Master volume controls are easily changed by turning up or down the appropriate dial. A red LED displays the current volume of each (0-80).