|
Above you see the 2 rear and the 1 on top pre-installed 80mm fans. These are all professionally done and have rubber molding around the edges, so no worry about cutting your finger if you ever need or want to switch out any fans. The top fan does not interfere if you have a drive installed in the top bay. You don't have much room left, but it'll fit.
Above you see the rear of the case as looking from the inside of course. Notice that the motherboard standoffs are already pre-installed. Pretty much all standard looking otherwise.
And above you see that the Xoxide guys cut out where the rear fans go to allow more airflow, and that does make for far better airflow and not as restricting as how many motherboard makers do with their tiny holes that do restrict about half the airflow. They also did this on the top and side panel fans, but not the front two intake ones.
Notice the rounded off corners on the edges. Even though this has become pretty much standard on most cases nowdays it's certainly worth mentioning. Also in the above picture notice there are two installed 80mm Sunon fans bringing cool air in but they serve a second and very big purpose. And that is to help cool any hard drives you install there. No hard drive cooler needed here.
Next Page >
< Previous Page
